Connection Diagrams - Aquatronica evolution ACQ110 Instruction Manual

Connect only original AQUATRONICA devices to BUS sockets.
BUS connectors do not operate with USB stands, so do not connect any commercial USB device to these
sockets to prevent irreparable damage.
AQUATRONICA declines all responsibility due to non-compliance with this provision.
13 - 60

Connection diagrams

WARNING
IsACQ110C-0 (ENG) Rev.230708-0
1
AUT
MAN
1) Switch for enabling emergency procedure:
AUT: operation as per set programs;
MAN: manual emergency operation, all
outputs powered.
ATTENTION: if the switch is on "MAN", no
set program on the controller will work on the
sockets.
2) Connectors for connecting temperature or
level sensors.
3) Connector for connecting the previous Aquat-
ronica controller (ACQ001).
4) BUS sockets for connection of:
• AQUATRONICA controller
• Original AQUATRONICA accessories
2
3 4
2