Password - Aquatronica evolution ACQ110 Instruction Manual

Password

Enable PIN
(Fig. 11 )
Enable PIN
OFF
01 minute delay
(Fig. 12)
0
3
2
Enter PIN
* * * * * *
(Fig. 13)
Mon 09/30/03
UP01 A B
(Fig. 14)
IsACQ110C-0 (ENG) Rev.230708-0
Settings Menu
This menu allows you to enable a PIN security code to pre-
vent unauthorised persons from involuntarily modifying any
settings (Fig. 11).
To select this menu, proceed as follows:
Main display g Main menu g Settings g Password
•
Set the ON/OFF values to enable/disable the PIN security
code (Fig.12).
•
Set a delay time (from 1 to 60 minutes) to establish after
how many minutes the security locking system should be
enabled.
A numerical value corresponds to every arrow key (0-1-2-3).
Digit the PIN code (which must consist in at least 1 and up to
a maximum of 6 numbers). When you have finished, press
"Enter". (Fig.13).
The controller will ask you to re-enter the PIN code as con-
firmation. Repeat the procedure described above and press
"Enter".
It is now possible to enable/disable the PIN code or modify the
enablement delay time by pressing "Enter" on the message
'enable PIN'. Alternatively, change the PIN code by pressing
1
'change PIN'.
At the end of the preset time, the bottom left symbol
appear in the main display indicating that the safety lock has
been enabled. The controller can also be locked manually by
holding the "Esc" key fro approx. 2 seconds (Fig.14).
The safety lock does not interfere with displays regarding
15:05 the various users nor with controller-user communication
messages.
N.B.: if you are unable to remember the PIN code, the
C D E F
controller can only be unlocked via pc.
will
25 - 60