Aquatronica evolution ACQ110 Instruction Manual page 41

Link Settings/Dosing Pump Actions
The XY programs can be used for the power units as well as any dosing pumps connected to the
system.
A program for the pumps is shown below.
Variable Setting
Function Setting
Program
In this example, if the pH goes above 8.0 (7.9+0.1), 5ml of pH Minus are dosed into the water at
24h intervals. If the value goes below 7.9, dosing automatically stops.
41 - 60
Variable 1
pH
Ref.
+ 0.1
Function 1
Dosing pumps
pH Minus
Milliliters: 5
Every: 24h00m
From: 08.00
V1: PH
V2: Undefined
A1: PH Minus
A2: Undefined
A3: Undefined
Max. time OFF
>
7.9
To: 12.00
IsACQ110C-0 (ENG) Rev.230708-0