Wave Effect; Insert - Aquatronica evolution ACQ110 Instruction Manual

Wave Effect

Insert

(Fig. 38)
Wave Effect
From 14:15
Pump SX
Pump DX
Not Defined
Mo Tu We Th Fr Sa Su
(Fig. 39)
Wave Effect
From 14:15
Pump SX
Pause
Pump DX
Mo Tu We Th Fr Sa Su
(Fig. 40)
32 - 60
Power Unit Menu
Wave Effect (Fig. 38)
This function can create one or more wave effects in an
aquarium.
To set this function, proceed as follows:
Main screen  Main Menu  Power Unit  Wave Effect.
Insert
• Two-pump Wave Effect without pause:
set the time interval which the effect will be produced, selec-
ting from the values "From" and "To".
Choose the two pumps necessary for the effect from the list
To 17:15
of available outputs and assign an ON time for each pump (in
seconds) found on the right side of the screen.
10s
In the example shown in the figure (Fig. 39) a Wave Effect has
10s
been set from 14.15 to 17.15 every day of the week in which
0s
the pumps "Pump SX" and "Pump DX" function alternately at
intervals of 10 seconds.
• Two-pump Wave Effect with pause:
set the time interval in which to produce the effect, setting the
values "From" and "To".
Select the first and third fields and place in them the two pumps
to be used from the list of available outputs and assign an ON
time for each pump (in seconds) found on the right side of the
screen.
In the second field, select the "Pause option" and, on the
To 17:15
right side of the screen, set the amount of time for the pause.
In the example shown in the figure (Fig. 40) a Wave Effect
10s
has been set from 14.15 to 17.15 every day of the week, in
5s
which the pumps "Pump SX" and "Pump DX" function alter-
10s
nately at intervals of 10 seconds with pauses of 5 seconds
after each pump turns off.
IsACQ110C-0 (ENG) Rev.230708-0