Connect the probe’s connector to the interface (ACQ210-TL). Connect the ACQ210-TL interface to the power unit (or HUB) using the provided BUS cable. NOTE: Insert the correct end of the connector into the power unit; inserting it in the other direction can seriously damage the equipment.
- Do not install the level sensor near reciprocating pumps. IMPORTANT Aquatronica guarantees reliable level control only if its line of sensors are used. The use of other brands of sensors could cause system anomalies. NOTE: in case of malfunctions or any doubts about the use of this interface, please contact AQUATRONICA’S free Technical Assistance.
Local regulations may provide for the separate collection of household appliances at municipal waste sites or retailers when a new product is purchased. IsACQ210TL-2 Rev. 240907-2 5 - 8 Via dell’Industria, 20 - 42025 Cavriago (RE) Italy Tel.: +39 0522 494403 Fax: +39 0522 494410 http:\\www.aquatronica.com E-mail: service@aquatronica.com...
Dear Customer, Thank you for the trust you have placed in AQUATRONICA by purchasing this product. AQUATRONICA subjects all its products to severe quality tests. If, in spite of the controls, the product should malfunction, we recommend you immediately contact the dealer/producer for any checks or interven- tions necessary.