Programs - Aquatronica evolution ACQ110 Instruction Manual

Temperature
Insert
(Fig. 58)
Temperature
27.5°C
∆
Max=0.5
27°C
∆
Min=0.3
26.7°C
Key to symbols
Values for which the system is enabled
45 - 60
Temperature Menu
Programs (Fig. 58)
Allows the user to make programs in relation to the tempe-
rature.
To insert a program, proceed as follows:
Main screen  Main Menu  Temperature  Pro-
grams.
• Select the "Insert" option with keys  and press "En-
ter".
To set up a program, the following must be established:
- A reference value, defined as the temperature for the tank,
which the system will aim to maintain by enabling/disabling
any heaters or coolers.
- A ∆ Max value, defined as the tolerance that must be
∆
observed with respect to values higher than the reference
Ref.+ Max
value.
Ref.
For example: If the reference is set to 27°C and the ∆ Max
∆
Ref.- Min
is 0.5°C, the system will be enabled at values higher than
27.5°C (see chart).
Time
- A ∆ Min value, defined as the tolerance that must be ob-
served with respect to values lower than the reference value.
For example: If the reference is set to 27°C and the ∆ Min
is 0.3°C, the system will be enabled at values lower than
26.7°C (see chart).
NOTE: ∆ Min and ∆ Max can be the same or different.
IsACQ110C-0 (ENG) Rev.230708-0