Screen Mode; Scrolling Time - Aquatronica evolution ACQ110 Instruction Manual

Screen Mode

Always ON
Stand-by
(Fig. 18)

Scrolling Time

Seconds: 05
(Fig. 19)
Would you like to
reset all settings?
Enter: Confirm
Esc: Cancel
(Fig. 20)
Aquatronica
FW version: x.y
Press any key to
continue
(Fig. 21)
IsACQ110C-0 (ENG) Rev.230708-0
Settings Menu
Screen Mode (Fig. 18)
This option allows the user to turn off the display if desired
("Always ON" is the programmed default).
To modify this option, proceed as follows:
Main screen  Main Menu  Settings  Display  Screen
Mode.
• Select between the two options using the keys :
Always ON = the display always remains on.
Stand-by = the display turns off automatically after a period
of about 3 minutes from the last action.
When finished, press "Enter".
Scrolling Time (Fig. 19)
Allows the user to select the interval of time with which the
values of the sensors are displayed (in succession) and the
state of the plugs on the main page (the programmed default
is 5 seconds).
To modify this option, proceed as follows:
Main screen  Main Menu  Settings  Display  Scrolling
Time.
• Select the scroll time (from 0-90 seconds) and press
"Enter" to confirm.
Reset Settings (Fig. 20)
This option resets the control unit, returning it to the initial
configuration (see paragraph "Getting started").
To utilize this function, proceed as follows:
Main screen  Main Menu  Settings  Reset Settings.
• Press "Enter" to confirm or "Esc" to cancel the operation
when the message appears.
About (Fig. 21)
This option displays the Hardware and Firmware version of
the control unit.
To utilize this function, proceed as follows:
Main screen  Main Menu  Settings  About.
27 - 60