Alarm - Aquatronica evolution ACQ110 Instruction Manual

Alarm

OFF
Greater than:
Less than:
(Fig. 64)
IsACQ110C-0 (ENG) Rev.230708-0
Temperature Menu
Alarm (Fig. 64)
It is also possible to set an alarm on the control unit, both
visual and acoustic, that will activate in the event that
the temperature exceeds the "Greater than" or "Less
than" values set.
In the case in which the temperature goes over these limits,
by setting the "Without Sound" alarm, the temperature
symbol on the main screen will flash. Instead, by setting the
"With Sound" alarm, the flashing temperature symbol is also
accompanied by an acoustic alarm and the icon
25.0°C
the main screen.
29.0°C
To set this function, proceed as follows:
Main screen  Main Menu  Temperature  Alarm.
• Select the option desired with keys  from:
OFF = alarm deactivated.
With Sound = alarm and acoustic signal activated.
Without Sound = alarm activated without the acoustic signal.
• Select the "Less than" parameter and afterwards "Greater
than" with keys  and with keys  set the temperature
that the alarm activates.
When all settings are complete, press the "Enter" key.
appears on
48 - 60