Power Unit Menu; Power Unit; Change Name - Aquatronica evolution ACQ110 Instruction Manual

Power Unit

Change Name

Manual Commands
Program Timer
Wave Effect
Tide Effect
(Fig. 22)
Change Name
Power Unit
Plugs
(Fig. 23)
Skim_
(Fig. 24)
Plug Selection
A A
B B
C C
D D
E E
(Fig. 25)
28 - 60

Power Unit Menu

Power Unit (Fig. 22)
This menu allows the user to carry out all the settings and
programs desired on the power units connected to the system.
NOTE: if more than one power unit is connected, a screen
will appear which allows the user to select the desired
power unit by using the keys . Press "Enter" to
confirm.
To select these parameters, proceed as follows:
Main screen  Main Menu  Power Unit.
Change Name (Fig. 23)
Modifies the name of the power units and their plugs.
To modify the name of the Power Unit, proceed as follows:
Main screen  Main Menu  Power Unit  Change Name.
• Select the Power Unit menu with keys  and press "Enter".
• Select the letters with keys  and use keys  to move
inside the word (E.g. Fig. 24). Press "Enter" to confirm.
To modify the name of the plugs, proceed as follows:
Main screen  Main Menu  Power Unit  Change Name.
• Select the "Plugs" menu with keys  and press "Enter".
• Select the plug whose name is to be modified with keys 
(see Fig. 25) and press "Enter".
• Select the letters with keys  and use keys  to move
inside the word (E.g. Fig. 24). Press "Enter" to confirm.
IsACQ110C-0 (ENG) Rev.230708-0