Manual Commands - Aquatronica evolution ACQ110 Instruction Manual

Manual Commands

Single Control
PU01 A B
(Fig. 26)
Manual Commands
All OFF
PU01 A B
(Fig. 27)
Manual Commands
All ON
PU01 A B
(Fig. 28)
Manual Commands
Restore All
PU01 A B
(Fig. 29)
IsACQ110C-0 (ENG) Rev.230708-0
Power Unit Menu
Manual Commands (Single Control)
Allows the user to manually modify the state of the outputs
being worked on independently from their set programs
(E.g. Fig. 26).
The "hand" symbol above the selected output indicates that
it is forced manually and OFF.
The "hand" symbol above the selected output with the
C D E F
corresponding letter highlighted indicates that it is forced
manually and ON.
To select this function, proceed as follows:
Main screen  Main Menu  Power Unit  Manual Com-
mands.
• Select the desired output with keys  while with keys
 modify its state. When finished, press "Enter".
Manual Commands (All OFF) (Fig. 27)
This manually deactivates all the outputs present on the power
unit simultaneously.
C D E F
To use this function, proceed as follows:
Main screen  Main Menu  Power Unit  Manual Com-
mands.
• Select "All OFF" with the keys  and press "Enter".
Manual Commands (All ON) (Fig. 28)
This manually activates all the outputs present on the power
unit simultaneously.
To use this function, proceed as follows:
Main screen  Main Menu  Power Unit  Manual Com-
mands.
C D E F
• Select "All ON" with the keys  and press "Enter".
Manual Commands (Restore All) (Fig. 29)
This function simultaneously eliminates all the manual
commands which were previously set on the power unit.
All outputs will automatically begin to function according to
their set programs.
To use this function, proceed as follows:
Main screen  Main Menu  Power Unit  Manual Com-
mands.
• Select "Restore All" with the keys  and press "En-
C D E F
ter".
29 - 60