Level Menu; Level; Change Name; Programs - Aquatronica evolution ACQ110 Instruction Manual

New device connected
S01

Level

(Fig. 75)
Level

Change Name

Programs

Alarm
Measuring Unit
(Fig. 76)
Level
(Fig. 77)
Level
Insert
(Fig. 78)
52 - 60

Level Menu

Level (Fig. 75)
All the menus relevant to this measurement are enabled only
when the level sensor is connected to the system.
When the level sensor is connected, the control unit will display
a plug-in screen where it is possible, if desired, to change the
name of the connected sensor (Fig. 75); press "Enter" to
confirm.
The control unit is already equipped to read and display the
level (with the supplied sensor).
Moreover, it is possible:
- to modify the state of the plugs depending on the level
readings;
- to set acoustic alarms.
To set this function, proceed as follows:
Main screen  Main Menu  Level.
Change Name (Fig. 76)
Modifies the name given to the sensor.
To modify the name, proceed as follows:
Main screen  Main Menu  Level  Change Name.
• Select the letters by using the keys  while using keys
 to move within the word.
Press "Enter" when finished.
Programs (Fig. 78)
Allows the user to make programs in relation to the level.
To insert a program, proceed as follows:
Main screen  Main Menu  Level  Programs.
• Select the "Insert" option by using keys  and press
"Enter".
IsACQ110C-0 (ENG) Rev.230708-0