Loading And Comparing Individual Laps From Different Files - Racelogic PerformanceBox Manual

Racelogic Ltd

Loading and comparing individual laps from different files

Lap data created by individual users, and therefore not logged in one .dbn file, can also be
loaded and compared:

Load the first file containing the lap data, set the start / finish line, and click the lap
timing button. The laps will appear in the results window.

Load the next file to be analysed – ensure that the results from the first file have not
been cleared, and do not load the second file as a compare file.

Click the laptiming button again and the second set of lap times will appear in the
results window.

The individual laps can now be chosen as Main and Compare files in the same
manner as before:
In this example, the main run chosen is lap 8 from the first set of times (the same fastest lap
from the previous example.) The Compare Run 1 is lap 8 from another file, which is again the
fastest lap. See below to view the differences in performance as shown in the Graph window.
02/05/2014
PerformanceTools Software
Page 55