Foot Rollout; Results And Best Files - Racelogic PerformanceBox Manual

Racelogic Ltd

1 Foot Rollout

The PerformanceBox normally takes the start of a performance run at the point at which the
vehicle moves, but at drag strips the vehicle starts 1 foot behind the timing start line. You can make
the PerformanceBox start all timing runs from 1 foot by enabling this feature.
Enabling 1 Foot Rollout correction
1. Press the MENU button to enter the Performance Menu.
2. Highlight the 1 FOOT ROLLOUT option and press OK.

Results and Best Files

If an SD card has been inserted and the 'Write Results File' option has been enabled, the
PerformanceBox will create two results files on the card. The first file, 'RESULTXX.TXT' gives the
results for every performance test made using the PerformanceBox, each time appending the data
onto the end of the file. The second file, 'BESTXX.TXT', displays only the best results achieved for
each type of test, overwriting previous results when required. If the unit is power-cycled, two new
files will be created with an incremented file name and all data will be written to the new files
instead.
Results text files are only created on the SD card if the 'Write Results File' option has been chosen
from the Performance Mode Menu:
Note: no results will be written to the files if the speed does not exceed 50km/h during the tests.
02/05/2014
PERFORMANCE MENU
UNITS

WRITE RESULTS FILE
ACCEL RANGE 1
ACCEL RANGE 2
Page 15
Performance Mode