Speed Buzzer; Event Marking - Racelogic PerformanceBox Manual

Racelogic Ltd

Speed Buzzer

The Speed Buzzer can be used in such tests as 0-100-0, as an audible warning when a certain
speed has been reached. This means that during such testing the driver will not need to watch the
display and can listen for the buzzer instead.
To change the speed at which the buzzer will sound, enter the MENU from any mode, scroll to
Setup and click OK. The speed buzzer is one of the options in the Setup menu. Pressing either the
▲▼ alters the speed setting.
The speed buzzer will only sound once when the set speed is reached. It will not continue to
activate every time the vehicle passes through the set speed, on acceleration or deceleration. In
order to arm the speed buzzer once more the vehicle must either come to a complete halt for five
seconds, or PerformanceBox must be power-cycled.

Event Marking

Pressing the OK button when in any of the Performance Mode screens will create an event mark in
the logged file (see 'Event Marking' in the software section.)
02/05/2014
SETUP MENU
DIAGNOSTICS
COLDSTART
SPEED BUZZER
UPGRADE
Page 17
Performance Mode