Racelogic Ltd
Speed Display
Speed Display Mode
The Speed Display Mode is divided into three screens. The first contains a compass and current
speed in a large font, the second is an Odometer and the third, an Altimeter. Navigate between
▲▼
these screens by using the
buttons.
Odometer
In the Speed Display Mode pressing the ▼ button selects Odometer Mode. The total distance
travelled in feet or metres (depending on units selected) will be displayed in the main window.
Pressing the 'RESET' button resets the Odometer back to zero.
Altimeter
In the Speed Display Mode pressing the ▲ button selects Altimeter Mode. The current altitude in
feet or metres (depending on units selected) will be displayed in the main window.
Event Marking
Pressing the OK button when in any of the Speed Mode screens will create an event mark in the
logged file (see 'Event Marking' in the software section.
02/05/2014
Page 26