Table of Contents
Advertisement
STARTING THE TRACTOR MOVE
1. Select the appropriate road or re-
duced speed gear.
2. Depress the clutch pedal.
3. Shift the main gear shifting lever and
the reverse gear shift lever to the
neutral positions, check turning off the
PTO switches on the right pillar of the
tractor cab
4. Start the engine.
5. Set 750-800 rpm.
6. Shift the reverse gear shift lever to the
required direction of tractor move
(forwards or backwards).
7. Shift the speed gear appropriate for
the initial tractor move.
8. Moderately
increase
speed
9. Prepare the parking brake for release
DRIVE OPERATIONS
10. Release the clutch pedal just to the
initial point of tractor move and with
simultaneously increasing the engine
speed, go on in smoothly releasing
the clutch pedal.
11. Release the parking brake com-
pletely.
12. Start moving smoothly and slowly.
Extremely sharp initial move can result
in overloading the driving mechanisms,
increasing the fuel consumption, causing
excessive wear of tires, and damaging
the load. The 1
be used for the initial slope-up move with
towing a heavy load and when crossing
a heavy terrain.
the
engine
F_02_36
st
speed gear should only
75
Advertisement
Chapters
Table of Contents
