Front Hook; Multi-Stage Hitch For Trailers; Multi-Stage Hitch Mechanical Tail - Zetor 86 41 forterra turbo Operator's Manual

FRONT HOOK

The front hook serves for towing the
tractor without trailer or another imple-
ment attached. The hole for inserting the
pin is located in the counterweight car-
rier compartment (A).
To rescue the tractor, make use
of the draw bar or a cable.
Never make use of chains be-
cause of the danger of fatal inju-
ries in case of their ruptures!
The use of the tractor axles (the
individual wheels) as a winch for
rescuing a stuck vehicle is strictly
forbidden
.
Note: In case the front counterweight is
mounted, a pin inserted in canister
counterweight may be used for the trac-
tor emergency rescue (B).
TRANSPORT APPLICATION
F_02_127

MULTI-STAGE HITCH FOR TRAILERS

This hitch serves for attaching two-axle
or lighter sing-axle trailers. The guiding
tail is vertically adjustable to three posi-
tions at 100-mm from each other. For the
operation with different agricultural im-
plements this tails should be readjusted,
tilted down or up or even removed to-
gether with the carrier – as the case may
be.
F133

MULTI-STAGE HITCH MECHANICAL TAIL

The tail pin diameter is 30 mm. The ad-
missible vertical static load equals 10 kN.
92
F134