Front Ballast Weights; Front Three-Point Hitch Ballast Weights - Zetor 86 41 forterra turbo Operator's Manual

FRONT BALLAST WEIGHTS

Weight Ballast weight mass
combination (kg)
(units)
2+2 4x50
3+3 6x50
5+5 10x50
7+7 14x50
Front can-type ballast weights are sus-
pended in the ballast weigh hanger.
They are locked against the side shifts
with a pin placed between the inner
weights. The other weights are then at-
tached to the inner ones with two
clamps.
Ballast weight combination 7+7 is
used at Z 11741 only
BALLAST WEIGHTS
F_02_26
Note: After inserting the pin, the front
weights and the weight holder can be
used as a front hook for emergency res-
cuing.
200
300
500
700
FRONT THREE-POINT HITCH BAL-
LAST WEIGHTS
The weights with the beam shall be sus-
pended at the lower tie rods of the front
three-point hitch. The task of those
weights consists in ensuring the tractor
longitudinal stability in case heavier at-
tached implements are suspended at the
rear three-point hitch.
157
Circular weights
Weight
Ballast weight mass
combination
(kg)
(units)
beam+16 beam 8+16x28
F_02_82
456