Bleeding The Fuel System - Zetor 86 41 forterra turbo Operator's Manual

BLEEDING THE FUEL SYSTEM

Before bleeding, place a suitable
vessel beneath the engine for col-
lecting the fuel dripping from the
filter and the injection pump.
HINTS FOR MAINTENANCE
F_02_93
BLEEDING THE FUEL SYSTEM
Z 8641 - Z 11741
Then proceed as follows:
- Pressurize the fuel system by means
of several strokes of the hand-
operated section of the delivery pump
(1)
- Loosen the screw of the fuel supply to
the filter (2) and let the foam escape.
- Tighten the screw (2) and repeat the
procedure until pure fuel flows out
when the screw is released.
- In the same way bleed the injection
pump
- For bleeding make use of the screw in-
stalled in the pump body (3)
F_02_197
Then proceed as follows:
- Pressurize the fuel system by means
- Loosen the screw of the fuel supply to
- Tighten the screw (2) and repeat the
167
BLEEDING THE FUEL SYSTEM
Z 11741
of several strokes of the hand-
operated section of the delivery pump
(1)
the filter (2) and let the foam escape.
procedure until pure fuel flows out
when the screw is released.
F_02_198