Lower Tie Rods Fitted With Extendable Terminals; Attaching Machines To Three Point Hitch With Cbm Hooks - Zetor 86 41 forterra turbo Operator's Manual

LOWER TIE RODS FITTED WITH EX-
TENDABLE TERMINALS
These tie rods make easier the connec-
tion of implements. After depressing the
yokes (1), the terminals (2) release. The
extended terminals shall be slid onto the
two implement pins and locked with the
pins (3), which are place in the support
on the extendable terminal - (A). With
the reverse move of the tractor, the ter-
minals enter the tie rods and automati-
cally lock in the working position - (B).
HITCHES
F195a

ATTACHING MACHINES TO THREE POINT HITCH WITH CBM HOOKS

Lower and upper links of hitch are equipped with semi-automatic ends -CBM. They
serve for easy, two-phase attaching and disattaching the implement to the three
point hitch without necessary direct action of the driver. They are operated by means
of cables from the driver's place. Lower links are attached to the implement within
the first phase at reverse move and by subsequent lifting the three point hitch. Top
link of three point hitch is attached by the driver from the cab within the second
phase. The top link is assembled in one from two openings of the support. First the
implement must be equipped with attaching balls-CBM and the length of hitch axis
must be adjusted with adjustable spacer (at reinforced three point hitch only).
At tractors equipped with reinforced three point hitch – CBM, the fine adjustment is
carried out by moveable collar with handles.
The collar of lift link must be ever set with handles in direction of driving after
adjusting the length.
140
F194