Fast Dipping; Implement Transportation; Stop Position - Zetor 86 41 forterra turbo Operator's Manual

FAST DIPPING

Lever (1) in the position "d" – i.e. the free
position. The lever must be kept in this
position, because when released, it gets
the position "c" – system operating in
accordance with the setting-up of the
controllers (3), (4), (5), and (6).
ELECTRO-HYDRAULIC SYSTEM
F_02_165

IMPLEMENT TRANSPORTATION

Shift the lifting lever (1) to the position
"a" and block the traverse lock (2).
Blocking the lifting lever (1) in position
"a" by a movable lock (2):
A - moving the lever is blocked
B - moving the lever is not blocked
When the tractor is stopped with
the implements attached, lower
the implements to the ground (do
not leave it with the implements
in the lifted position).
F_02_166

STOP POSITION

When shifting the lever (1) to the posi-
tion "b" - stop position, the three-point
hitch stops moving immediately.
129
F_02_167