Filling Oil Into The Engine; Replacing The Fuel Filtering Cartridge; Cleaning The Rough Fuel Filter - Zetor 86 41 forterra turbo Operator's Manual

FILLING OIL INTO THE ENGINE

Through the filling hole (2) pour the pre-
scribed amount of engine oil, start the
engine and keep it running for 2 - 3 min-
utes at 750 - 800 rpm.
After stopping the engine and settlement
of the oil level, check the oil for proper
level with the dipstick (1) and the filter,
drain plug and other joint for tightness.
HINTS FOR MAINTENANCE
F_02_196
REPLACING THE FUEL FILTERING
CARTRIDGE
For replacing the filtering cartridge,
loosen the nut (1) and unscrew the bowl
(2). When replacing the clean bowl with
the new filtering cartridge, ensure the
proper seating of the bowl sealing. Bleed
the fuel system.
For cleaning and replacing the filtering
cartridges, place a suitable vessel be-
neath the engine for collecting the drip-
ping fuel.
F238

CLEANING THE ROUGH FUEL FILTER

Unscrew the nut (1) and remove the filter
bowl (2) with its sealing and strainer.
Clean the bowl and strainer with Diesel
oil. When putting back the filter bowl
make sure - before tightening the nut -
the sealing is in correct position. Bleed
the fuel system.
166
F_02_194