Tires For Driving Wheels; Tires For The Driving Wheels; Putting The Tractor Out Of Operation - Zetor 86 41 forterra turbo Operator's Manual

When loading the tractor, the admissible loading of axles as specified in the table "Tractor technical parameters" may not be ex-
ceeded.. Deviations of the tire loading capacities from the basic values are defined in the following tables.
Note:: The 100% inflation pressures of tires are included in the tables of the recommended tire inflation "Prevailing operations -
For the field applications".

TIRES FOR DRIVING WHEELS

Driving wheels – diagonal tires
Speed Load. cap.
km/h %
10 140**
20 120
25 107
30 100
35 90
40 80
** Minimum value for 6 PR
To increase the loading capacity of tires
– excepting the above stated cases – by
increasing the pressures of inflation over
the values defined in the table with si-
multaneously reducing the speed – is
not allowed.
HINTS FOR MAINTENANCE

TIRES FOR THE DRIVING WHEELS

Driving wheels – radial tires
Inflation Speed
pressure % km/h
125 10
100 20
100 25
100 30
100 35
100 40
Load. cap. Inflation
% pressure %
150 125
123 100
111 100
107 100
103 100
100 100
184
PUTTING THE TRACTOR OUT OF
OPERATION
If the tractor is put out of operation for a
shorter period of time, inflate the tires to
the pressure designed for the drive on
the road. When putting the tractor out of
operation for a longer period of time
(storage), place the tractor on supports
and reduce the pressure in tires to mini-
mum value (the wheels may not touch
the ground).