DRAIN HOLES AND PLUGS
Pos..
Hole – plug
1 -
Oil from clutch box
2 -
Oil from the gearbox
3,4,5 -
Oil from final drive box
HINTS FOR MAINTENANCE
F_02_118
CHECKING AND EXCHANGING OIL IN THE GEARBOX
If necessary, replenish the oil up to the upper border of the dipstick flat (1), or to
some of the marks depending on the class of job the tractor is employed. For meas-
uring the oil level in the gearbox, stop the engine and insert the plug dipstick fully
into the tube mouth.
Level in the gear-
A
minimum
B
normal
+7 l (increased)
C
+15 l - maximum
D
The filling hole for the transmission oil (2) is placed in the hydraulic system cover..
Accessible from the tractor rear side.
box
Aggregation of machines with high oil takeoff
176
Tractor employment
Standard operation
Standard operation
Operation in a slope
F_02_136