Advertisement
Related Products
‡EcoWebServerIII
Mitsubishi Electric Energy-saving Data Collection Server
Simple Set-up
When using the set-up software supplied, power management meters
connected to CC-Link and measurement data can be set by mouse and
keyboard operations.
Display Measurement Data as Graphs on a Web Browser
The main unit has a built-in web server that allows anyone, anywhere to
understand the amount of energy being used in real time via computer
without requiring additional software, thereby supporting early detection of
energy waste.
Automatic Transmission of Data Collected, Mail Notifications and
Contact Output
Users are notified of changes in energy, facilities, etc. via e-mail and alarms.
Energy management targets and status monitoring of entire factories and
buildings help ensure that problems onsite are detected without fail.
◇PLC data can also be sent to EcoWebServerIII by Ethernet.
◇Utilize an internal network to show the data of numerous company sites at
a centralized location (e.g., head office).
‡ME110SS
ME110 Super-S Series Electronic Multi-measuring Instruments
The innovative design of the SS Series is supporting the realization of energy-saving
measurement monitoring systems that are easy to use and read
Common-use Models
Two phase wiring system (Three phase 3-wire and Three phase 4-wire
systems) were required previously, but user needs can now be met with a
single unit.
Enhanced Visibility
Wide-angle-view LCD with top and bottom tiers integrated for total freedom in
installation. Crystal-clear display makes text even easier to read when
viewed from the front.
Operating Time, CO
Conversion, Alarm Display Functions
2
Functions that enable load operating time measurement, conversion to CO
emissions and backlight blinking at the time of an alarm are incorporated.
‡EcoMonitorLight
Energy Measuring Unit
Easily accessible "energy visualization" with a single unit!
A two-model line-up: a Three phase 3-wire system designed for users wanting simple power measurements at low cost; and a Three phase 4-wire
system designed for users looking for basic power measurements plus something extra (harmonic measurements, alarm monitoring, etc.).
Simple Measurements
The built-in LCD enables easy setting, measurement and display of power
used for energy management.
MODBUS
RTU (RS-485) Communication as Standard Equipment
®
Meters come with MODBUS
allowing the device to be used as a PLC system, other high-order system,
display device (GOT), etc.
Logging/Communication Units for Expanded Measurement
Applications
The product line-up also includes logging units/communication units (CC-Link
communication unit) that can be incorporated as add-on options, enabling
installations that best match to the customer's usage environment.
‡Logging unit: Data measured by the main unit (current, voltage, power,
etc.) can be output to an SD memory card in CSV file format, realizing
simple data management.
Highly Accurate Measurements and Support Functions
Customer activities are supported through functions such as 250µs
high-precision (short-cycle load) measurement, operating time measurement,
wiring error detection and test output.
29
RTU communication as standard equipment,
®
Simplify data management with
2
EcoWebServer III!
LAN (Ethernet)
Advertisement
