Using The Peel-Liner Rewinder Option; Configure The Printer Menu - Printronix SL4M User Manual

Remove Printed Media from the Rewinder
1. Open the media cover and side cover.
2. Press the
printhead, and tear the liner from behind the last printed label.
3. Manually rewind the remaining printed labels onto the rewinder by turning
the rewinder.
4. Pull the media rewinder clip (along with the printed labels) off the
rewinder.
5. Remove the printed labels from the media rewinder clip. Set the printed
labels aside.
6. Insert the media rewinder clip into the rewinder.
7. Close the side cover and media cover.

Using The Peel-Liner Rewinder Option

The Peel-Liner Rewinder allows you to automatically peel die-cut labels off
their liner (backing) and dispense them one at a time while rewinding the liner.

Configure the Printer Menu

1. Set Media Handling to Peel-Off under the MEDIA SETUP menu.
(See "Configuring The Printer" on page 61 for more information.)
2. Calibrate the printer (see "Running Auto Calibrate" on page 47).
Using The Peel-Liner Rewinder Option
(Feed) key to advance the last printed label past the
Configure the Printer Menu
217