Appendix B
Using The Standard Peel Option
Using The Standard Peel Option
Configure the Printer Menu
1. Set Media Handling to Peel-Off in the MEDIA SETUP menu.
See Chapter 4, "Configuring The Printer" on page 61 for more
information.
2. Calibrate the printer (see "Running Auto Calibrate" on page 47).
NOTE: Calibration in Peel-Off mode is allowed only if Cal in Peel Mode is set
CAUTION
When the printer calibrates in peel-off mode, a series of labels will
quickly dispense. Be prepared to remove the peeled labels as they
automatically peel or the printer will jam.
Load Media
NOTE: Peel
shaded label
off liner.
Label
Standard Peel
Door
Standard Peel
Opening
Figure 6. Loading the Printer for Standard Peel Operation
212
to Enable. Cal in Peel Mode appears only if only if Admin User is set
to Enable in the PRINTER SETUP menu.
Media Width
Guide
Peel Bar
Standard Peel Roller
Media Cover
Pivoting
Deck
Deck Lock
Lever
Media Damper