Printronix SL4M User Manual page 151

8. Set the transfer mode. Select binary mode for flash downloads.
Type bin<Enter>
9. Start the file transfer.
Type put xxxxx.xxx<Enter>.
Use the actual file name in place of xxxxx.xxx.
10. Wait for ftp to indicate the download is complete.
Print jobs (not flash downloads) only
It is possible to send additional print jobs by repeating steps 9 and 10.
Flash downloads only
Flash downloads will reset the printer when the file transfer is finished, and ftp
will be unavailable until the printer is online again.
11. End ftp when the file transfer is complete. For flash downloads, wait until
the printer is online again.
Type quit<Enter>
12. Close the DOS window.
151