Printronix SL4M User Manual page 109

Batch Counter
Displays the number of pages remaining in a print job.
•
Disable (factory default). The # Pages remaining to be printed will not
display. Instead, the Active emulation and interface will display on the
second line of the control panel LCD.
•
Enable. The # Pages remaining to be printed will display on the second
line of the control panel LCD. This feature is supported in PGL and ZGL
only. The PGL Execute command to support this feature is
~EXECUTE;NAME;(#Pages). The ZGL Execute command is
^PQ(#Pages).
NOTE: If the correct execute command is absent from the print file, "0 Pages"
will continually display on the control panel LCD.
Date
This menu allows you to set the date and time. The date is expressed in
hh:mm YYYYMMMDD.
hh = hour (24 hour format)
mm = minute
MMM = month
DD = day
YYYY = year
Disp. Intensity
Sets the Display Intensity values from 0 to 20. The factory default is 10.
Admin User
•
Disable (factory default).
•
Enable. When enabled, this function permits access to submenu items
which would not normally be changed by a typical user.
PRINTER SETUP Submenus
109