4. Press
5. Press the Down key until Run Profile displays and then press
(The printer will continue to print the profile until you press
The printer will advance media and continue to print a dynamic profile
image depicting the relationship of the label and any label length
indicators detected.
6. Press
7. Press the Pause key until OFFLINE displays.
NOTE: The Gap/Mark and Paper Out Threshold values shown on the Profile
printout represent the last values determined from a successful Auto
or Manual Calibrate or the factory default values if no Auto or Manual
Calibrate was performed.
255
191
Paper Out(167)
127
Gap Mark(109)
063
000
↵
to enter the SENSOR SETUP menu.
↵
. The printer will stop printing.
Figure 1. Media Profile Printout
Running Media Profile
Sensing Different Media Types
↵
.
↵
.)
49