Printronix SL4M User Manual page 220

Appendix B
Using The Peel-Liner Rewinder Option
Figure 13. Securing Liner onto the Rewinder
12. Insert the media rewinder clip to secure the media. See Figure 13.
13. Manually rotate the rewinder one full revolution clockwise until the liner is
taut.
14. Remove labels from the liner so that behind the tear bar the liner is
without labels for approximately 1.5 inches.
15. Remove labels from the liner so that below the tear bar the liner is without
labels for approximately 2 inches.
16. Rotate the deck lock lever fully clockwise to close the pivoting deck.
220
Liner
Rewinder
Media Rewinder Clip