Printronix SL4M User Manual page 203

I. Tag Specification
(Mark Sensing)
Black Mark (on underside)
Recommended
Cross Perf
Location
B
Direction of Media Motion
A Label Width Range
B Liner Width Range
C Min. Gap/Hole/Notch Height
D Media Length Range
Tear-Off Strip Mode
Peel-Off Mode
Cut Mode
Rewind Mode
Continuous Mode
E Media Thickness Range
G Width of Inter-label gap/hole
I Min Refl. Mark Width
K Min. Refl. Mark Height
These figures are approximate and depend upon the active emulation and application.
Figure 5. Media Dimensions
Table 19. Media Specifications
SL4M/T4M
0.87 to 5.0 inches
22 to 128 mm
1.0 to 5.15 inches
25 to 128 mm
0.10 in.
2.54 mm
0.98 in. (25 mm) to 5.16 in. (131 mm)
1 in. (25.4 mm) to 99 in. (2515 mm)
0.25 in. (6.35mm) to 99 in. (2515mm)
0.98 in. (25 mm) to 5.16 in. (131 mm)
0.25 in. (6.35mm) to 99 in. (2515mm)
0.002 to 0.011 in.
0.06 to 0.268 mm
0.25 to 0.50 in.
6.35 to 12.7 mm
0.5 in.
12.7 mm
0.10 in.
2.54 mm
III. Label Specification
(Gap Sensing)
Direction of Media Motion
Media
III. Label Specific
(Gap Sensing
Direction of Media
203