Assigning A Static Ip Address To The Sp; Log In To The Sp (Ser Mgt Port) - Oracle SPARC T8-4 Installation Manual

Parameter Description
Date and Time
Accept the default date and time or change the values.
root Password
Type the root password twice. This password is for the superuser account for the Oracle Solaris OS on this
server. This password is not the SP password.
Related Information
Oracle Solaris OS documentation
■
"Configure the Preinstalled OS" on page 71
■
"Reach a State to Install a Fresh OS (Oracle ILOM CLI)" on page 72
■
"Reach a State to Install a Fresh OS (Oracle ILOM Web Interface)" on page 74
■

Assigning a Static IP Address to the SP

If your network does not use DHCP, the NET MGT port is not operational until you configure
network settings for the SP.
Note -
SPM using the SER MGT port to configure the NET MGT port for your network. See
a Static IP Address to the NET MGT Port" on page
"Log In to the SP (SER MGT Port)" on page 77
■
"Assign a Static IP Address to the NET MGT Port" on page 79
■
Related Information
"Oracle ILOM System Console" on page 70
■
"Oracle Solaris OS Configuration Parameters" on page 76
■
"Log In to the SP (SER MGT Port)" on page 77
■
"Assign a Static IP Address to the NET MGT Port" on page 79
■

Log In to the SP (SER MGT Port)

After the SP boots, access the Oracle ILOM CLI to configure and manage the server. The
Oracle ILOM CLI prompt (->) is displayed the first time the SP is booted. The default
If you are unable to use DHCP on your network, you must connect to the Oracle ILOM
Assigning a Static IP Address to the SP
79.
Powering On the Server for the First Time
"Assign
77