Table of Contents
Advertisement
Chapter 2 Preparations
1.10
Power Supply Fan
In the following configuration of the non-redundant power source, the optional power supply support fan is
required.
When mounting the optional RAID controller
When mounting the optional dustproof bezel
When mounting the option responding to the high-temperature environment
Install the power supply support fan according to the following description.
Installation
1.
See Chapter 2 (1.2 Overview of Installation and Removal) for preparation.
2.
Remove the side cover while referring to Chapter 2 (1.3 Removing the Side Cover).
3.
Remove the air duct.
4.
Install the Power Supply Fan to the front of the power supply, and fix it by using attached one screw.
N8181-132F Power Supply Fan
58
Fix it with the
screw (one piece).
Express5800/T110j User's Guide
1. Installing Internal Optional Devices
Fix it with the screw
(two pieces).
N8181-178F Power Supply Fan
Advertisement
Table of Contents
