14. Apply the hand brake and engage the brake lever
lock; then remove the cap screws from the front
drive coupler.
15. Remove the cap screws from the rear drive coupler.
16. Remove the exhaust springs; then remove the muf-
fler. Account for a grafoil seal.
17. Remove the nuts securing the exhaust pipe to the
exhaust manifold; then remove the exhaust pipe.
Account for a steel gasket.
18. Place a suitable block between the oil pan and frame
member; then remove the front engine mount cap
screw and nut. Account for a flat washer.
34
DE494A
19. Remove the cap screw and nut from the upper right
engine mount. Account for a flat washer.
20. Remove the nuts and cap screws from the left rear
DE081A
and right rear engine mounts. Account for two flat
washers.
DE089A
DE086A
DE088A
DE085A
DE090A