Arctic Cat 700 DIESEL 2015 Service Manual page 35

10. Remove the V-belt cooling fan assembly; then dis-
connect the V-belt inlet and outlet cooling boots from
the V-belt housing.
11. Remove the fuel inlet and lift pump output hoses
from the lift pump. Discard four crush washers.
12. Remove the fuel supply and fuel return hoses from
the fuel rail.
The fuel rail connections are easily bent. Use care when
removing the hose clamps and hoses.
13. Disconnect the wire connectors from the temperature
sensor, oil pressure sensor, gear position switch con-
nector, and voltage regulator; then disconnect the
starter solenoid, glow plug power wire, and the alter-
nator positive wire.
DE682C
DE076A
DE078A
DE065A
CAUTION
DE104A
DE067A
DE077C
33