Arctic Cat 700 DIESEL 2015 Service Manual page 104

13. Connect the fuel supply and return hoses and secure
with the hose clamps.
14. Using new crush washers, connect the fuel inlet and
lift pump outlet banjo-fitting bolts to the lift pump
and tighten the banjo-fitting bolts securely.
102
15. Install the V-belt cooling fan assembly; then install
the V-belt cooling boots to the V-belt housing.
DE077C
16. Connect the V-belt cooling fan connector.
DE494A
17. Install the air filter assembly and secure with four
cap screws; then connect all hoses and secure with
hose clamps. Tighten all hardware securely.
DE065A
18. Install the coolant filler neck on the thermostat hous-
ing and tighten the hose clamp securely; then install
the upper radiator hose. Tighten all hose clamps
securely.
DE078B
DE076A
DE518A
DE682C