Setting The Maximum Number Of Concurrent Login Users; Displaying And Maintaining Aaa; Aaa Configuration Examples; Aaa For Ssh Users By An Hwtacacs Server - HP 5920 Series Configuration Manual

Setting the maximum number of concurrent login
users
Perform this task to set the maximum number of concurrent users who can log on to the device through a
specific protocol, regardless of their authentication methods: no authentication, local authentication, or
remote authentication.
To set the maximum number of concurrent login users:
Step
1. Enter system view.
Set the maximum number of
2.
concurrent login users.

Displaying and maintaining AAA

Execute the display command in any view.
Task
Display the configuration of ISP domains.

AAA configuration examples

AAA for SSH users by an HWTACACS server

Network requirements
As shown in
Use the HWTACACS server for SSH user authentication, authorization, and accounting.
•
Assign the default user role network-operator to SSH users after they pass authentication.
•
• Exclude domain names from the usernames sent to the HWTACACS server.
Use expert as the shared keys for secure HWTACACS communication.
•
Figure 1 1, configure the switch to meet the following requirements:
Command
system-view
•
In non-FIPS mode:
aaa session-limit { ftp | http |
https | ssh | telnet }
max-sessions
•
In FIPS mode:
aaa session-limit { https | ssh }
max-sessions
Command
display domain [ isp-name ]
47
Remarks
N/A
By default, the maximum number of
concurrent login users is 16 for
each user type.