Specifying An Access Control Method; Setting The Maximum Number Of Concurrent 802.1X Users On A Port - HP 5120 EI Switch Series Configuration Manual

To do...
Set the port
authorization
state

Specifying an access control method

You can specify an access control method for one port in interface view, or for multiple ports in system
view. If different access control methods are specified for a port in system view and interface view, the
one specified later takes effect.
Follow these steps to specify the access control method:
To do...
Enter system view
Specify an
access control
method
NOTE:
To use both 802.1X and portal authentication on a port, you must specify MAC-based access control.
For more information about portal authentication, see the chapter "Portal configuration."
Setting the maximum number of concurrent 802.1X users on a
port
You can set the maximum number of concurrent 802.1X users for ports individually in interface view or in
bulk in system view. If different settings are configured for a port in both views, the setting configured later
takes effect.
Follow these steps to set the maximum number of concurrent 802.1X users on a port:
To do...
Enter system view
Set the
maximum
number of
concurrent
802.1X users
on a port
Use the command...
dot1x port-control { authorized-force |
In system view auto | unauthorized-force } [ interface
interface-list ]
interface interface-type interface-number
In Layer 2
Ethernet
dot1x port-control { authorized-force |
interface view
auto | unauthorized-force }
Use the command...
system-view
dot1x port-method { macbased |
In system view
portbased } [ interface interface-list ]
interface interface-type interface-
In Layer 2
number
Ethernet
dot1x port-method { macbased |
interface view
portbased }
Use the command...
system-view
dot1x max-user user-number [
In system view
interface interface-list ]
interface interface-type interface-
In Layer 2
number
Ethernet
dot1x max-user user-number [
interface view
interface interface-list ]
Remarks
—
Optional
Use either approach.
By default, the maximum number
concurrent 802.1X users is 256.
77
Remarks
Optional
Use either approach.
By default, auto applies.
Remarks
—
Optional
Use either approach.
By default, MAC-based
access control applies.