Specifying An Access Control Method; Setting The Maximum Number Of Concurrent 802.1X Users On A Port; Setting The Maximum Number Of Authentication Request Attempts - HP 6125G Configuration Manual

Specifying an access control method

You can specify an access control method for one port in Ethernet interface view, or for multiple ports in
system view. If different access control methods are specified for a port in system view and Ethernet
interface view, the one specified later takes effect.
To specify the access control method:
Step
1. Enter system view.
2. Specify an access
control method.
Setting the maximum number of concurrent 802.1X
users on a port
You can set the maximum number of concurrent 802.1X users for ports individually in Ethernet interface
view or in bulk in system view. If different settings are configured for a port in both views, the setting
configured later takes effect.
To set the maximum number of concurrent 802.1X users on a port:
Step
1. Enter system view.
2. Set the maximum
number of concurrent
802.1X users on a
port.
Setting the maximum number of authentication
request attempts
The network access device retransmits an authentication request if it receives no response to the request
it has sent to the client within a period of time (specified by using the dot1x timer tx-period
tx-period-value command or the dot1x timer supp-timeout supp-timeout-value command). The network
Command
system-view
•
(Approach 1) In system view:
dot1x port-method { macbased |
portbased } [ interface interface-list ]
•
(Approach 2) In Ethernet interface view:
a. interface interface-type
interface-number
b. dot1x port-method { macbased |
portbased }
Command
system-view
•
(Approach 1) In system view:
dot1x max-user user-number [ interface
interface-list ]
•
(Approach 2) In Ethernet interface view:
a. interface interface-type interface-number
b. dot1x max-user user-number [ interface
interface-list ]
82
Remarks
N/A
Optional.
Use either approach.
By default, MAC-based access
control applies.
Remarks
N/A
Optional.
Use either approach.
The default maximum
number of concurrent
802.1X users on a port is
2048.