Vca Envelope Switch; Vcf Envelope Switch - Behringer DEEPMIND 12 User Manual

74 DeepMind 12 User Manual

8.8.1 VCA ENVELOPE SWITCH

To access the VCA ENVELOPE page press the VCA Envelope switch.
FLASHING=EDIT
The VCA ENVELOPE switch will then start fl ashing and the VCA ENVELOPE menu is
then shown:
To navigate the options in the VCA ENVELOPE menu, use the UP, DOWN, switches.
Selected parameters are adjusted using the -NO/+YES switches, the rotary knob
or the dedicated fader. The rotary knob has a click which allows very accurate
control. The fader allows rapid adjustment across the full range:
The following options are available in the VCA ENVELOPE menu:
VCA-ENV-TRIG - This option allows you to select the triggering mode for the VCA
ENVELOPE from the following:
• • Key - This option will force the envelope to be triggered each time a key is
pressed.
• • LFO-1 - This option will force the envelope to be triggered each time LFO 1
starts a new cycle.
• • LFO-2 - This option will force the envelope to be triggered each time LFO 2
starts a new cycle.
• • Loop - This option will force the envelope to be re-triggered each time the
end of the release stage is reached.
• • Seq - This option will force the envelope to be re-triggered on every step of
the CONTROL SEQUENCER.
ADSR ATK: - This controls the attack time of the VCA envelope. I.e. the time is
take for the sound to transition from zero to its maximum level. As the value
increases, the slower the attack time becomes and the longer it takes for the
sound to reach its maximum level.
ADSR DCY: This controls the decay time of the VCA envelope. After a sound
reaches the maximum level, the decay time controls how quickly the level will
transition to the sustain level. As the value increases, the longer the decay time
becomes.
ADSR SUS: This controls the level for the sustain stage of the VCA envelope. The
sound will stay at this level while a note is held on the keyboard.
ADSR REL: This option control the release time of the VCA envelope. This controls
how quickly it takes the sound to decay from the sustain level to zero when a key
is released.

8.8.2 VCF ENVELOPE SWITCH

To access the VCF ENVELOPE page press the VCF ENVELOPE switch.
FLASHING=EDIT
The VCF ENVELOPE switch will then start fl ashing and the VCF ENVELOPE menu is
then shown:
To navigate the options in the VCF ENVELOPE menu, use the UP, DOWN, switches.
Selected parameters are adjusted using the -NO/+YES switches, the rotary knob
or the fader. The rotary knob has a click which allows very accurate control. The
fader allows rapid adjustment across the full range:
The following options are available in the VCF ENVELOPE menu:
VCF-ENV-TRIG - This option allows you to select the triggering mode for the VCF
ENVELOPE from the following:
• • Key - This option will force the envelope to be triggered each time a key is
pressed.
• • LFO-1 - This option will force the envelope to be triggered each time LFO 1
starts a new cycle.
• • LFO-2 - This option will force the envelope to be triggered each time LFO 2
starts a new cycle.
• • Loop - This option will force the envelope to be re-triggered each time the
end of the release stage is reached.
• • Seq - This option will force the envelope to be re-triggered on every step of
the CONTROL SEQUENCER.
ADSR ATK: This controls the attack time of the VCF envelope. I.e. the time is take
for the fi lter to open from the VCF FREQ fader setting to the level set by the VCF
ENV fader. As the value increases, the slower the attack time becomes and the
longer it takes for the fi lter to open.
ADSR DCY: Sets the decay time of the VCF envelope. After a sound reaches the
frequency set at its attack stage, the decay controls how quickly the fi lter then
transitions to the frequency set with the sustain knob.
ADSR SUS: Sets the fi lter cut-off frequency for the sustained portion of the
sound. The sound will stay at this fi lter frequency for as long as a note is held on
the keyboard.
ADSR REL: Sets the release time of the envelope. This controls how quickly the
fi lter closes when a key is released.