Global Commands - Behringer DEEPMIND 12 User Manual

120 DeepMind 12 User Manual
MSB LSB 14-bit Parameter Name
1 39 - 50 167 - 178 FX 1 Params
1 51 179 FX 2 Type
1 52 - 63 180 - 191 FX 2 Params
1 64 192 FX 3 Type
1 65 - 76 193 - 204 FX 3 Params
1 77 205 FX 4 Type
1 78 - 89 206 - 217 FX 4 Params
1 90 218 FX 1 Output Gain
1 91 219 FX 2 Output Gain
1 92 220 FX 3 Output Gain
1 93 221 FX 4 Output Gain
1 94 222 FX Mode
1 95 - 111 223 - 239 Program Name
1 112 240 Program Category
1 113 241 Program Transpose

18. Global Commands

Parameter Name Range
MIDI Channel 0-16
Keyboard Local 0-1
Fader Local 0-1
Global Tune 0-255
MIDI Clock Source 0-2
MIDI Program Change Mode 0-2
USB Control mode 0-2
MIDI Control mode 0-2
MIDI Soft Thru 0-1
USB to MIDI 0-1
MIDI to USB 0-1
Fixed Velocity 0-1
Velocity 0-127
Velocity Curve 0-127
Transpose 0-96
Aftertouch Curve 0-127
Pedal CC 0-3
Sustain CC 0-3
Fader Pick Up Mode 0-2
LCD Brightness 0-9
LCD Contrast 0-9
Arp Send to MIDI 0-1
Send NRPN on load 0-2
Keyboard Octave 0-7
Range Notes
0-255 FX Slot 1 Parameters
0-33 See FX Type list
0-255 FX Slot 2 Parameters
0-33 See FX Type list
0-255 FX Slot 3 Parameters
0-33 See FX Type list
0-255 FX Slot 4 Parameters
0-150
—
—
0-150 Output gain for FX slots 1-4
0-2 Insert (0), Send (1), Bypass (2)
0-127 Null terminated Program name. 16(+1) char ASCII string.
0-16 See program category table
80 - 176 -48 (80) ... 0 ( 128) ... 176 (+48 )
Description
Sets MIDI Rx / Tx channel. 0 = All, 1 = Ch1 ... 16 = Ch16
Sets the keyboard, mod and pitch wheels 'local' mode, i.e whether they control the synth (1) or just send MIDI (0)
Sets the fader local mode, i.e whether the faders control the synth (1) or just send MIDI (0)
0=-128 cents, 128=0 cents 255 = +127 cents
Sets the source for the Arp clock. MenuItemMidiClock_e (Internal, MIDI, USB )
Sets whether the synth receives or sends Program changes or both. MenuItemProgramChangeMode_e (Rx, Tx, Both)
Sets whether the synth sends CC (eg for controlling a soft synth) or NRPN messages to USB (for our iOS App) - this is set automatically when an
app notify message is received.
Sets whether the synth sends CC (eg for controlling another synth) or NRPN messages to MIDI (for our VST App) - this is set automatically when
an app notify message is received.
Sets whether the synth forwards messages received on MIDI In to MIDI Out (Off , On ).
Sets whether the synth forwards messages received on USB to MIDI Out (Off , On )
Sets whether the synth forwards messages received on MIDI In to USB (Off , On )
Sets whether the keyboard sends fi xed (1) or dynamic (0) velocity as part of a Note On message.
Sets the velocity sent when in fi xed mode.
(-64 : +63 - TBD ) sets the curve used to convert key velocity into MIDI note velocity - adjust to suit style of playing
(-48 : 48 ) set the keyboard transpose amount (aff ects local & MIDI operation)
(-64 : +63 TBD) sets the curve used to convert key pressure into MIDI aftertouch - adjust to suit style of playing
Sets the MIDI Controller sent by the foot controller pedal input ( Foot Control (CC4), Breath (CC3), Volume (CC7), Expression (CC11)
Sets the polarity and function of the sustain pedal switch (Normal+, Normal-, Arp(+), Arp(-))
Set the Fader pick-up mode (Relative, Pass-thru, Jump )
Sets the LCD brightness in 10% steps (10% to 100%)
Sets the LCD contrast in 10% steps (10% to 100%)
Enables transmission of arpeggiator output to MIDI out (both USB and physical MIDI)
(may be removed for release version) - Dumps NRPN values when a new program is loaded (mainly for ctrlr) MenuItemSendNrpnOnLoad_e (Off ,
MIDI, USB)
(0-MAX_KEYBOARD_OCT) Sets octave shift for keyboard. At 0, left most key is C0
—
—
—