Global (Global Menu); Connectivity - Behringer DEEPMIND 12 User Manual

24 DeepMind 12 User Manual

GLOBAL (Global Menu)

Within the GLOBAL menu there are fi ve pages:
• • CONNECTIVITY - All settings relating to connectivity and communication
with external devices including backup and restore functions.
• • KEYBOARD SETTINGS - All settings relating to the keyboard including
aftertouch and velocity.
• • PEDAL SETTINGS - All settings relating to the pedal inputs.
• • PANEL SETTINGS - All settings relating to panel (local), faders, dialogs,
menu functionality, and display brightness and contrast.
• • SYSTEM SETTINGS - All system settings, including versions, fan speed,
calibration, and backup.
This chapter covers each of the pages in detail.
Note: To access successive GLOBAL pages simply press the GLOBAL switch again
to cycle through the pages. There is a help message on the bottom of each screen
to show you what the next menu will be if you press the GLOBAL switch again.
To access the GLOBAL menu simply press the GLOBAL switch, the switch will
remain illuminated while you are in this menu:
The display will then show the GLOBAL menu.
Note: The fi rst time you access the GLOBAL menu after turning on the DeepMind
12, you will see the CONNECTIVITY page. Whenever you access the GLOBAL menu
after that point, you will be returned to the last page you visited within the menu
system. This feature is reset when the unit is powered off .
Note: The page location memory function can be turned off using the
REMEMBER PAGES function in the PANEL SETTINGS menu.

7.2.11 CONNECTIVITY

In this menu there are all the settings relating to connectivity and
communication with external devices including backing up and restoring
programs and data.
To navigate the options in the CONNECTIVITY menu, use the UP, DOWN, switches.
Selected parameters are adjusted using the -NO/+YES switches, the rotary knob
or the fader. The rotary knob has a click which allows very accurate control. The
fader allows rapid adjustment across the full range.
DEVICE ID - This is MIDI Device Identifi er (ID) which is used to identify the device.
This is important when multiple devices are present in a system, and ensures
that the device in question responds to the system exclusive messages which are
solely for the device in question.
The DEVICE ID can be any number from 1-16.
To change the DEVICE ID, make sure that the ' < ' symbol next to the DEVICE ID
number is highlighted. Then you can either turn the rotary knob, or use the data
entry slider.
MIDI SETTINGS MENU - This menu contains settings for the MIDI sockets on the
rear of the DeepMind 12.
To access the MIDI SETTINGS menu, make sure that the ' < ' symbol on the MIDI
SETTINGS line is highlighted. Then press the +/YES switch, you will now see the
MIDI SETTINGS menu.
MIDI-CTRL - This option sets the MIDI CONTROLLER communication mode
• •
for the DeepMind 12 MIDI sockets on the rear of the synthesizer. You can
choose Off (No controller messages will be sent), Cc (Continuous Controller)
or NRPN (Non-Registered Parameters).
Note: Both MIDI and NRPN data is always received and actioned.
Note: For more information on controlling the DeepMind 12 via MIDI,
please consult the section on MIDI later in this document.
• • PROG-CHANGE - This option sets the PROGRAM CHANGE communication
mode for the DeepMind 12 MIDI sockets. You can choose from the following
options:
RX - Program change messages will be received only.
TX - Program changes will be transmitted only.
RX-TX - Program changes will be transmitted and received.
NONE - No program change messages will be sent or received.
• • RX-CHANNEL - This option sets the MIDI channel that will be used to
RECEIVE MIDI messages. The CHANNEL can be any number from 1-16.
• • TX CHANNEL - This option sets the MIDI channel that will be used to
TRANSMIT MIDI messages. The CHANNEL can be any number from 1-16
• • SOFT-THRU - This option enables PASS-THRU mode from the MIDI INPUT
socket to the MIDI OUTPUT socket. The options are On or Off .
• • MIDI>USB-THRU - This option enables PASS-THRU mode from the MIDI
INPUT socket to the USB host. The options are On or Off .
• • MID>WIFI-THRU - This option enables PASS-THRU mode from the MIDI
INPUT socket to the WIFI connection. The options are On or Off .
To exit this menu press the GLOBAL switch to return to the CONNECTIVITY menu.