Edit Arp/Seq Switch - Behringer DEEPMIND 12 User Manual

41 DeepMind 12 User Manual

8.1.7 EDIT ARP/SEQ SWITCH

The DeepMind 12 ARPEGGIATOR allows you to play a pattern of notes based on
the individual keys being held. This section covers in detail all the parameters
related to the ARPEGGIATOR.
To enter the EDIT page for the ARPEGGIATOR & CONTROL SEQUENCER press the
EDIT switch.
FLASHING=EDIT
The EDIT switch will then start fl ashing and the ARPEGGIATOR menu will
then appear:
Note: In the ARP/SEQ EDIT menu there are three pages (ARPEGGIATOR, CONTROL
SEQUENCER and SYNC SETTINGS). This section covers the ARPEGGIATOR menu. To
cycle through the pages use consecutive presses of the EDIT switch. The bottom
line of the screen will show guidance to the next page.
To navigate the options in the ARPEGGIATOR menu, use the UP, DOWN, switches.
Selected parameters are adjusted using the -NO/+YES switches, the rotary knob
or the fader. The rotary knob has a click which allows very accurate control. The
fader allows rapid adjustment across the full range.
KEY SYNC - This option allows you to turn KEY-SYNC (Key Synchronisation) On and
Off . When KEY-SYNC is On, the arpeggiator will start playing at soon as you strike
the fi rst note (when no keys are pressed). When KEY-SYNC is Off , the arpeggiator
will start playing using the Master BPM (internal or external) and ARP CLOCK
(after division) as its timing source. The default value is Off .
ARPEGGIATOR KEY SYNC
ARP CLOCK
ARP NOTES
(KEY SYNC OFF)
KEY PRESS
ARP NOTES
(KEY SYNC ON)
OCT - This option allows you to choose how many OCTAVES the ARPEGGIATOR will
cycle through. The OCTAVE range is from 1 to 6. If you only choose one OCTAVE
the ARPEGGIATOR will simply cycle the notes based on the root note and the
MODE. If you choose more than one OCTAVE the ARPEGGIATOR will cycle through
the notes/MODEs for each OCTAVE sequentially.
The default value is 2 OCTAVES.
ARPEGGIATOR OCTAVES
1 OCTAVE
2 OCTAVES
3 OCTAVES
4 OCTAVES
5 OCTAVES
6 OCTAVES
MODE - This option allows you to select the note order for the arpeggiator from
one of the options below:
• • UP - Notes are played from the lowest to the highest, then repeated.
ARPEGGIATOR MODE - UP
• • DOWN - Notes are played from the highest to the lowest, then repeated.
ARPEGGIATOR MODE - DOWN
• • UP-DOWN - Notes are played from the lowest to the highest, then from the
highest to the lowest, then repeated. There is no repetition at the highest
and lowest notes.
ARPEGGIATOR MODE - UP/DOWN