Hpf; Vca Edit Menu; Hpf Freq Fader - Behringer DEEPMIND 12 User Manual

72 DeepMind 12 User Manual

8.6.2 VCA EDIT MENU

To access the VCA PARAMETERS menu press the VCA EDIT switch.
FLASHING=EDIT
The VCA EDIT switch will then start fl ashing and the VCA PARAMETERS menu is
then shown.
To navigate the options in the VCA PARAMETERS menu, use the UP,
DOWN, switches.
Selected parameters are adjusted using the -NO/+YES switches, the rotary knob
or the fader. The rotary knob has a click which allows very accurate control. The
fader allows rapid adjustment across the full range:
The following options are available in the VCA PARAMETERS menu:
ENVELOPE-DEPTH - This option allows you to control how much the VCA
ENVELOPE will be used to modulate the per voice VCA.
This is the primary method to sculpt the shape of a sound. For more information
please consult the section on the VCA ENVELOPE
The ENVELOPE-DEPTH range is from 0 to 255. The default ENVELOPE-DEPTH
setting is 255.
VELOCITY-SENS - This option allows you to control how much the velocity at
which you strike the keys will aff ect the per voice VCA. I.e. the harder you strike
the keys, the louder the sound and the softer you strike the keys the quieter the
sound will be.
The VELOCITY-SENS range is from 0 to 255. The default VELOCITY-SENS setting
is 128.
PAN-SPREAD - This option allows you to control how much the individual voices
will be spread across the stereo image.
VCA PAN SPREAD
1 2 3 4 5
+VE
PAN SPREAD
12 11 10 9 8
-VE
PAN SPREAD
The PAN-SPREAD range is from 0 to 255. The default PAN-SPREAD setting is 0.
6 7 8 9 10 11 12
7 6 5 4 3 2 1

8.7 HPF

The HIGH PASS FILTER (HPF) is applied to the output of the VCA. Because the VCA
has summed all the voices the HPF will aff ect all voice simultaneously by design.

8.7.1 HPF FREQ FADER

The HPF FREQ fader controls the cut-off frequency of the HPF. The HPF will begin
cutting frequencies above the cut-off frequency at continue to cut them at a rate
of -6 dB per octave.
The HPF fi lter can be useful to remove subsonic frequencies from your sound
if required. You can also use the fi lter to sculpt the sonic characteristics of the
program, or you can dynamically adjust the fader to create sweeps of the fi lter
which will create distinctive movement.
The HPF Frequency is available in the Mod Matrix as a destination where it can be
modulated from any of the Mod Matrix sources.
HPF FREQUENCY
LOW
FREQUENCY (Hz)
MED
FREQUENCY (Hz)
HIGH
FREQUENCY (Hz)
The HPF FREQ range is from 20.0 Hz to 2000.0 Hz. The default HPF FREQ setting is
20.0 Hz (fully open).
SAWTOOTH SQUARE