Bootloader Menu - Behringer DEEPMIND 12 User Manual

128 DeepMind 12 User Manual

22. Bootloader Menu

!
This menu is for factory or service use only. Improper use
may cause damage to the DeepMind 12.
Note: Please ensure you backup any programs / patterns before using any of the
bootloader functionality
To show the bootloader menu follow these steps:
1. Ensure the DeepMind 12 is turned off .
2. Press and hold the PROG and WRITE switches.
3. Turn the DeepMind 12 on.
4. Release the PROG and WRITE switches.
You will now see the bootloader menu, the options are decribed in this section.
In order to select an option make sure that the ' < ' symbol on the appropriate
CALIBRATE line is highlighted using the BANK/UP and BANK/DOWN switches then
press the +/YES switch.
22.1 1- Format WiFi Flash
Factory Use Only.
22.2 2- MIDI Update
Factory Use Only.
22.3 3- Reset Cal Data
This option will reset the calibration data.
22.4 4- Reset Chords
This option will reset the chord memory.
22.5 5- Reset PolyChords
This option will reset the polychord memory.
22.6 6- Reset Globals
This option will reset the global settings.
22.7 7- Reset ALL
This option will perform all formatting resetting covered in options 1-5 settings.
22.8 8- EXIT
This option will exit the bootloader menu and return the DeepMind 12 to
normal operation.