Behringer DEEPMIND 12 User Manual page 101

101 DeepMind 12 User Manual
Dual Pitch (DUAL PITCH SHIFTER)
No DM12 REF PARAMETER
1* SM1 Semi1
2* CN1 Cent1
3 DL1 Delay1
4* GN1 Gain1
5* PN1 Pan1
6* MIX Mix
7* SM2 Semi2
8* CN2 Cent2
9 DL2 Delay2
10* GN2 Gain2
11* PN2 Pan2
12* HIC HiCut
RotarySpkr (ROTARY SPEAKER)
No DM12 REF PARAMETER
1* LOS LoSpeed
2* HIS HiSpeed
3* ACC Accel
4* DIS Distance
5* BAL Balance
6* MIX Mix
7* MOT Motor
8* SPD Speed
UNITS MIN MAX
— -12.0 12.0
— -50.0 50.0
ms 1.0 ms 500.0 ms
% 0.0% 100%
% -100.0% 100%
% 0.0% 100%
— -12.0 12.0
— -50.0 50.0
ms 1.0 ms 500.0 ms
% 0.0% 100%
% -100.0% 100%
Hz 200.0 Hz 20000.0 Hz
UNITS MIN MAX
Hz 0.1 Hz 4.0 Hz
Hz 2.0 Hz 9.9 Hz
% 0.0% 100%
% 0.0% 100%
— -100.0 100.0
% 0.0% 100%
— RUN STOP
— SLOW FAST
DESCRIPTION
Adjusts the pitch of the fi rst channel in semi-tones.
Adjusts the pitch of the fi rst channel in cents.
Adjusts the time diff erence between the wet and dry signals. Sync options from 4 to 1/64 bars.
Allows gain compensation to be applied to the fi rst channel.
Allows panning of the fi rst channel.
Controls the mix (or ratio) of wet (processed) and dry (unprocessed) signals.
Adjusts the pitch of the second channel in semi-tones.
Adjusts the pitch of the second channel in cents.
Adjusts the time diff erence between the wet and dry signals. Sync options from 4 to 1/64 bars.
Allows gain compensation to be applied to the second channel.
Allows panning of the second channel.
Allows the high frequencies aff ected by the pitch shifting to be reduced.
DESCRIPTION
Adjusts the rotational speed when the Low Speed operation is selected.
Adjusts the rotational speed when the High Speed operation is selected.
Adjusts how quickly the speed increases and decreases from the Slow mode to the Fast mode.
Adjusts the distance between the Rotary speakers and the virtual microphone.
Adjusts the balance between the virtual horn and virtual drum controlling the signal tone.
Controls the mix (or ratio) of wet (processed) and dry (unprocessed) signals.
Allows The rotation eff ect of the motor to be disengaged (STOP).
Selects either the slow or fast speeds for rotation.