Osc 2 Tone Mod Fader - Behringer DEEPMIND 12 User Manual

56 DeepMind 12 User Manual
As you increase the amount of PITCH MODULATION the variance in the pitch of
oscillator will increase resulting in larger increases and decreases as
demonstrated in the diagram below:.
OSC 2 PITCH MODULATION AMOUNT (LFO AS SOURCE)
OSC 2
LFO (SIN)
PITCH MOD LOW
PITCH MOD MED
PITCH MOD HIGH
The OSC 2 PITCH MOD range is from 0.00cents to 36.0 semitones. The default OSC
2 PITCH MOD setting is 0.00cents.
The OSC 2 PITCH MOD fader has a non-linear response which gives more
resolution at smaller settings, to allow delicate or fi ne use of the modulation. The
response of the OSC 2 PITCH MOD fader is shown below:
PITCH MOD Fader Response
36
0
0
Fader Position
The fader position, current value and stored value for the OSC 2 PITCH MOD fader
is shown on the PROG screen. There is also a visualization of the waveform as
shown below. The arrows indicate the polarity of the waveform.
Note: for ENVELOPE sources the arrow will only point in the UP direction
indicating that the base modulation will be positive from the base pitch.
Note: for Uni-polar LFO sources the arrow will only point in the UP direction
indicating that the base modulation will be positive from the base pitch.
The default source for the pitch modulation is LFO1. For more information on
selecting the OSC 1 pitch modulation source please consult the section later in
this document.

8.3.6 OSC 2 TONE MOD FADER

10
The OSC 2 TONE MOD fader controls the TONE MODULATION of the OSC 2 SQUARE
waveform, The TONE MOD SOURCE is selected in the OSC EDIT page described
later in this section. When the TONE MOD source is set to MANUAL, the fader
controls the TONE MODULATION. When the TONE MOD source is set to any of the
modulation sources the fader controls the depth of TONE MODULATION.
TONE MODULATION can be used in many ways e.g. to create a double phasing
eff ect, or used when creating complex string type sounds. The harmonic
structure of the OSC changes considerably when using TONE MODULATION, and
the results can often have a metallic quality.