Adjusting The Seat Upholstery - Otto Bock Voyager Evo Instructions For Use Manual

Settings
2) Fold the seat pad forwards away from the hook-and-loop fastener (not illustrated).
3) Pull the back padding up and off the hook-and-loop fastener on the back upholstery and remove it (see fig. 26).
4) Loosen the backrest straps and then fasten together with the desired tension (see fig. 27).
5) Fit the back padding and secure it with the hook-and-loop fastener to the back and seat upholstery:
→ Place the kink in the back padding at the top. The "V" in the padding (see fig. 28, item 1) shows exactly
where the kink is.
→ Pull the back padding flap tightly downwards.
→ Pull the part of the flap that can be fastened forwards and fasten tightly to the seat upholstery (see fig. 29,
item 1).
INFORMATION: The part of the flap that can be fastened prevents sliding or falling through the
gaps between the straps and protects against draughts.
6) Fasten the seat pad and the seat cushion.
26
28

6.6.2 Adjusting the Seat Upholstery

INFORMATION
You can slightly correct the centre of gravity by making small changes to the sag of the seat upholstery. Larger
corrections to the centre of gravity must be made by making changes to the settings on the frame, the axle unit
and the caster wheels.
The adaptable seat upholstery can be adjusted in segments to the needs of the user.
1) Remove the seat cushion.
2) Pull the seat pad off the hook-and-loop fastener (see fig. 30).
3) Pull the flap of the backrest pad off the hook-and-loop fastener and let it hang down.
4) Loosen the backrest straps and then fasten together with the desired tension (see fig. 31).
5) Secure the backrest pad to the seat upholstery with the hook-and-loop fastener. To do this, pull the part of the
flap that can be fastened forwards and fasten to the seat upholstery (see fig. 29).
INFORMATION: The part of the flap that can be fastened prevents sliding or falling through the gaps
between the straps and protects against draughts.
6) Secure the seat pad to the seat upholstery by means of the hook-and-loop fastener with edges aligned (see
fig. 30, item 1).
18 | Ottobock
27
29
Voyager Evo