Options; Storage; Preparation For Use; Assembly - Otto Bock Voyager Evo Instructions For Use Manual

Preparation for Use

4.2 Options

The functionality and operation of the options are described in more detail in the instructions for use (user).
All of the available options/accessories are listed on the order form.

4.3 Storage

The wheelchair must be stored in a dry place. The ambient temperature must be maintained between -10 °C and
+40 °C during transportation and storage.
During extended storage, the knee lever wheel lock on wheelchairs with PU tyres must be released since tyre
deformation may otherwise result.
Tyres contain chemical substances that can react with other chemical substances (such as cleaning agents, acids,
etc.).
5 Preparation for Use

5.1 Assembly

CAUTION
Exposed pinch points
Risk of crushing or pinching the fingers due to incorrect handling
► When folding out the backrest, only grip by the specified components.
CAUTION
Incorrect fitting of the rear wheels
Risk of falling or tipping due to wheels coming loose
► After every assembly, check the proper mounting of the rear wheels. The wheel axles must be securely locked
in the fitting.
INFORMATION
For details of weights of the individual parts, see section "Technical Data".
1) Push the rear wheels into the wheel brackets. The quick-release axles must not be able to be removed after the
pushbutton has been released.
2) Pull the backrest cable until the locking mechanism releases (see fig. 1). Position the backrest upright and
allow it to engage. Do not reach into the locking mechanism while doing so.
3) Insert the side panels in the side panel mountings. In doing so, ensure that the mounting plate is up against the
side panel from the outside (see fig. 2).
4) If necessary: Insert the calf strap.
5) Fit the seat cushion on the hook-and-loop material.
1
8 | Ottobock
2
Voyager Evo